福禄克网络公司的PM06测试插头可以帮助您应对Cat 6互用性的挑战

福禄克网络公司在主要行业出版物中发表了关于DSP-PM06通用模块的介绍性新闻，福禄克网络是*个实现Cat 6开放电缆系统要求的电缆测试供应商。

Cabling, Installation & Maintenance 杂志：有了DSP-PM06测试头，网络施工人员不论选择哪家厂商的元件，都可以测试和认证该连接硬件或跳线是否满足Cat 6元件要求。

有关PM06的详细资料请参阅：http://www.anheng.com.cn/products/article.php?articleid=76

[原文如下：]
Module built for accurate Cat 6 certification

https://anheng.com.cn/news/html/cabling_test/90.html 

For use with Fluke Networks' DSP-4300 and OMNIScanner 2 cable analyzers, the DSP-PM06 Personality Module is, according to the manufacturer, the industry's first test plug built to ensure Category 6 interoperability as well as compliance. The center-plug design removes the variability found in vendor-specific patch cords and test plugs so that installers can accurately certify an "open" cabling system. With DSP-PM06, says Fluke, network installers can test and certify that their connecting hardware and patch cords are Category 6 component-compliant, no matter which manufacturer's components they have chosen. It supports all UTP, FTP, and ScTP cabling systems.

---

Electrical Business 杂志：PM06测试头与DSP-4300和OMNIScanner2电缆分析仪配合使用，它“中心插头”的设计可以消除特定厂商跳线和测试插头的可变性，因此施工人员可以**地认证“开放”电缆系统。

[原文如下：]
Centred test plug
Fluke Networks
Info. No. 100

https://anheng.com.cn/news/html/cabling_test/90.html 

Fluke Networks says its DSP-PM06 Personality Module is the first and only centred, shielded test plug for Category 6 cabling. For use with the DSP-4300 and OMNIScanner2 cable analyzers, this test plug features a "centre plug" design which removes the variability found in vendor-specific patch cords and test plugs, so installers can accurately certify an "open" cabling system. The PCB-based and cable-free design of the PM06 complies with all plug specifications of the Category 6 component standards and supports all UTP, FTP and ScTP cabling systems.

关于安恒 安恒公司自1994年与Fluke公司合作以来，*直以网络维护与测试的***为目标，坚持不懈地开拓着网络维护与测试市场，2000年成为Fluke网络国际部大分销商。安恒积*地参与了国内布线测试标准的制定和宣贯，并编写出版了《智能建筑网络工程测试与验收》。安恒网络维护学院开设的“光缆布线认证测试工程师培训”课程—— CFTT 得到了广大光缆布线厂商的支持与认可。